Probe Support Hardware




Jakarta Office : 021-45850618

Surabaya Office : 031-8421264

Fluke Probe Support Hardware


Mechanical support for probes

When setting up a new calibration bath, you need a way to suspend your probes in the bath fluid. We recommend our modular mechanical support systems. Made of fine-quality steel and machined parts, these support components combine in hundreds of ways to solve almost any probe suspension problem

Single probe kit

Our single probe kit is a good way to get started. It has one medium clamp, one 10-inch rod, one bosshead, and one V-base for holding one probe.

Economy kit

Our economy kit includes two V-bases, one 29-inch stainless steel rod, two 23-inch rods, five bossheads, two micro-clamps, and one medium clamp. This will build a bench-mounted frame for suspending one rod and three clamps over a bath opening. Simply add to your setup as needed. Choose from any of the listed accessories.

Individual hardware

Our selection of clamps and stands provides a simple way to hold probes and thermometers in baths during calibration. System components can be assembled in a number of ways to suit individual needs. Select clamps, rods, bossheads, and bases to fit your individual needs.


Model Name Description

Single Probe Kit

  • 1 medium clamp
  • 1 10-inch rod
  • 1 bosshead
  • 1 V-base

Economy Kit

  • 2 V-bases
  • 1 29-inch stainless steel rod
  • 2 23-inch rods
  • 5 bossheads
  • 2 micro-clamps
  • 1 medium clamp

Micro-Clamps (package of 2)
Holds the thermometers and probes with diameters to 0.75 inch


Medium Clamp (package of 1)
Holds diameters up to 1.75 inches


Non-Slip Tape (1 roll)
Increases grip on clamps and bossheads


Stainless Steel Rods (package of 1)
10 inches
Used to assemble supports, frameworks, or scaffolds


Stainless Steel Rods (package of 1)
20 inches
Used to assemble supports, frameworks, or scaffolds


Stainless Steel Rods (package of 1)
23 inches
Used to assemble supports, frameworks, or scaffolds


Stainless Steel Rods (package of 1)
29 inches
Used to assemble supports, frameworks, or scaffolds


Bossheads (package of 5)
Clamps two rods at right angles. Also attaches clamps to rods


Screw Bases (package of 4)
Holds one rod and is screwed to the surface of your bench or bath lid. 2.5-inch-diameter base; screws included


V-Base (package of 1)
Holds one rod. Weighted for excellent stability. 1 kg (2.2 lb)


Large V-Base (package of 1)
Same as 2064 but larger. Recommended for holding SPRTs and large probes. 2 kg (4.4 lb). (May be too large for some baths.)

{tab=Related Product}


Close info